Quickguard filters fit directly into your earmoulds, or on the end of your in-the-ear hearing aids.

Product details:

There are 8 filters in one pack.

They are the newer generation of the Siemens HF4 Pro Wax Filters

How to change your Wax Filters:

1. Clean your earmould with a cloth
2. Take out black stick from the Wax Filter pack. There are two different ends to the black stick.
3. Use the black end to pick up the old filer in the earmould
4. Turn black stick around and insert the new filter (white end) into the now empty slot. It should fit snugly
5. Dispose of the black stick
6. They should be changed monthly.

The post Signia Quickguard appeared first on Auckland Hearing.

This olive oil is in an easy to use 15 ml dropper bottle.

Note: Olive oil may help in relieving blocked hearing and wax removal, but can not totally replace micro-suction.

The post Olive oil in a dropper bottle appeared first on Auckland Hearing.

• Increased comfort while wearing hearing aids
• Eases insertion and removal of hearing aids
• Provides a snug acoustical seal to reduce feedback & whistling

The post Otoferm appeared first on Auckland Hearing.

Product details:

1,45V

Box of 10 cards, each card containing 6 batteries (60 Batteries).

Made in Germany

Expires July 2022

The post 13 Batteries-Box of 10 cards (60 Batteries) appeared first on Auckland Hearing.

Box of 10 cards (60 Batteries).

Product details:

Size 312

1,45V

Box of 10 cards, each card containing 6 batteries (60 Batteries).

Made in Germany

Expires April 2023

The post 312 Batteries-Box of 10 cards (60 Batteries) appeared first on Auckland Hearing.

They have a range of filters which give varying amounts of sound attenuation (reduction) depending on your needs.

The filters can be removed and swapped for other filters in the PRO range for different sound environments or hearing protection needs. The ability to change the filters gives you complete control over your protection with just a single set of ear moulds.

For Musicians

Pro plugs allow musicians to stay within the safe limits of noise while remaining engaged with the performance. The musician earplugs have a flat frequency response, especially for the 10 and 15 dB filters.

For other noise protection

Proplugs can also be used for motorsport and industrial noise. Pro plugs have a vented cavity, which means there is less occlusion, and it is more comfortable to speak while wearing them.

Filters available include the following attenuation levels:

• 10 dB  – singers and acoustic performers – a subtle.
• 15 dB – vocalists, orchestral and acoustic musicians.
• 17 dB – Best suits amplified musicians, DJ’s, vocalists, sound engineers, clubbers and gig-goers (more attenuation in the higher frequencies).
• 20 dB – some drummers, motorsport and industrial uses.
• 26 dB – as well as by sound engineers, amplified musicians, drummers and venue staff.
• 27 dB – Used in extreme industrial environments and motorsports.
• 31 dB – Tested to the AS/NZS 1270 standards as Class 5. Used in extreme industrial environments.
• Pro Impulse – The filter gives a constant noise reduction of approximately 15dB; this increases to a maximum of 33dB when in response to a sudden loud noise.

The process of getting your earplugs

We will make you a 30-minute appointment at Auckland Hearing to have ear impressions made.

We make your ear impressions by putting a silicon-based material into your ear canals, which goes hard after about five minutes.

The impressions are sent to the manufacturer to be made into your custom earplugs. It takes about two weeks for the earplugs to be made and sent back to us.

Please phone us on 09 525 0522 or email [email protected] to make an appointment. The appointment to discuss the best earplugs for you and make ear impressions .

Price is per pair of earplugs and includes the impressions.

The post Pro Series Custom-Made Earplugs – Musicians, Motorsport and Industrial noise appeared first on Auckland Hearing.

Charge, dry, UV-C. Thanks to the innovative Smart Dryer Li-Ion, you can both recharge and dry your rechargeable hearing aids.

Compatible with Signia Pure Charge&Go charger and Cellion charger.

This allows for complete and optimal maintenance.

The post Signia Smart Dryer Li-Ion appeared first on Auckland Hearing.

Included in the packet is also a brush to help remove wax from the domes.

An instruction pamphlet is also included.

The post Signia Click Dome Removal Tool Set appeared first on Auckland Hearing.

The domes help the hearing aid stay in your ear and help protect the receiver of your hearing aid.

To change the domes:

1. Take the hearing aid and hold the receiver tightly
2. Then use your finger to carefully pull off the old Resound dome from the receiver
3. Take the new Resound domes and look on the back on the domes for the little hole
4. Fit the dome to the receiver and push the domes into the receiver

The post Resound Surefit domes appeared first on Auckland Hearing.

For use with Phonak Marvel Hearing aids. This system is not compatible with the older systems.

CeruSheild  filters fit directly onto the end of your receiver

How to change your CeruShield Filters:

1. Remove the dome with a cloth
2. There are two deposits- 1 is the rubbish bin and opening number 2 is where you will collect the replacing filter
3. Turn the disk clockwise until you see a new filter in opening number 2
   1. Place your fingers gently on the arrows of the Disk and turn
   2. Do not place your fingers on the openings of the Disk to turn, because this will block the rotation.
4. Insert the end of the receiver into opening number 1 to remove the old filter
5. Insert the end of the receiver into opening number 2 to collect the new filter
6. Put the dome back on the hearing aid.
7. You should change the CeruShield Filters once a month.

Product details:

There are 8 filters in one pack.

The post Phonak CeruShield disk appeared first on Auckland Hearing.